LAMINATE, SOLID WOOD AND VENEER SURFACES

Wet or moisture wiping with a cleaning towel moistened in a neutral washing liquid. After wet wiping, the surface is dried. Clean hardened surfaces by soaking with undiluted neutral washing liquid. Keep the exposure time of chemicals as short as possible. Rinse and dry. Do not use abrasive detergents, steel wool or similar products that wear down the surface. Hot, hard and sharp objects can damage laminate, wood and veneer surfaces. Care must be taken that moisture or detergent does not damage the plate surfaces, so stains and liquids must be cleaned immediately.

POWDER COATED AND CHROME METAL PARTS

Wet or moisture wiping with a cleaning towel moistened in a neutral washing liquid. Lightly dirty surfaces are cleaned with a damp towel, and hardened surfaces can first be moistened with detergent and then dried with a damp cloth.

UPHOLSTERY FABRICS

Upholstery fabrics should always be cleaned according to the manufacturer’s instructions. Use a vacuum cleaner or a soft brush to remove the dust. If soap-based cleaners are used, all soap residue should be cleaned from the fabric. Always test the suitability of the cleaning agent on the invisible surface of the fabric. Do not machine wash or dry clean. Remove all stains immediately before they harden. Stains should be removed immediately with a clean absorbent cloth. Do not use solvents, chemicals, waxes or polishes as they will damage the surface of the fabric. Some textile dyes, such as jeans, can stain the fabric permanently. Most stains can be removed with cold or warm water and a clean microfiber cloth.

MAINTENANCE SERVICE

Lepo renovates the used furniture of its collection: by renewing the cushions, upholstery and surface treatments of the metal frames, as well as by renewing the foot glides, castors and other spare parts of each model according to the needs of the space.